A great starter kit for someone new to growing their own cannabis. This kit contains all the basic hardware and equipment required to start growing good weed at home. Its small size makes it perfect for those with limited space or an unused closet.
The high-quality Full Spectrum SMD LED light will have more than enough power to take you from seed to harvest. These lights are also quiet and produce minimal heat. This LED light replaces a 250 Watt HPS/MH bulb.
Pair this kit with the carbon filter upgrade to reduce smell and help airflow.
All the gear you need to successfully grow one cannabis plant indoors.
Each kit contains these items.
Reefertilizer Nutrient Combo
All the nutrients your cannabis plants will require from seed to flower.
Our Start soil conditioner is made to enrich just about any medium with organic and renewable compost with active mycorrhizal spores.
Grow fertilizer is specifically designed to be fed to young plants so they grow quickly and avoid any sort of nutrient deficiency.
Bloom is for when your plants begin to flower and your plant’s nutritional requirements change to facilitate new bud growth.
Simply feed your plants once a week and water them as needed. These nutrients are easy to measure, mix, and apply on your cannabis plants.
Decided to transplant my Pink Kush clone today. Her roots are looking awesome, thanks to Reefertilizer Start.
I use Reefertilizer for my White Widow CBD, and it loves the Grow nutrients mix.
Easy too use, great customer service and support. They responded to my questions quickly. plants growing great!
Mars Hydro 70cm x 70cm Indoor Grow Tent
This tent was selected for its affordability and value. This small tent is large enough to grow 2 small plants or one plant with wiggle room. The outer canvas is made from a heavy duty material that will block light and keep in moisture. Setup takes only 10-15 minutes. When not in use, it can be stored in a duffel or hockey bag.
Its size makes it a perfect fit for a medium sized closet. There are also plenty of sealable ports for routing wires and ducting.
|Material||Heavy Duty Nylon|
|Ducting Port Quantity||3 ( 2×6”+1×8″ Double Cinching )|
|Electrical Port Quantity||2 (3″)|
|Vent Size||2 x 3″, 2 x 8″, 4 x 10″(Quantity*Diameter)|
|Ventilation System||1×8″ roof mount; 2×6″ upper side mount; 3×0.5 sq foot lower vents|
|Mesh Window Size||7”×12”(Quantity* L/W)|
|Dimension||28” × 28” × 64” 1680D ‘(70cm x 70cm x 160cm’)|
|N.W/G.W||7.4KG / 16.3lbs and 8.3KG / 18.3lbs|
Mars Hydro TS 1000 Full Spectrum SMD LED Grow Light
|Item NO.||TS 1000|
|Coverage||Veg: 3ft x 3ft; flowering: 2ft x 2ft|
|Compare to HPS/MH/HID||250 watts|
|Hanging Distance||Seedling stage: 20~28‘’ Veg Stage: 16~20‘’ Flowering Stage: 10~16‘’|
|Spectrum||Warm White (3000K), Blue Light (5000K), Red Light (660nm), IR Light (730nm)|
|Chip Brand||SMD Epistar|
|Number of LEDs||342|
|Dimension||36cm x 33.6cm x 3.5cm|
|Work Temperature||-4°F ~105°F (-20°C ~ 40°C)|
Each kit comes with two ratchet hangers for holding up lights or a carbon filter.
High-quality durable polypropylene rope means you won’t have to worry about anything falling and damaging your tent or equipment. Made with special composite material that ensures a lifetime of usage. Heat and cold resistant.
Easily adjust the height of the light, and can hold up to 150lbs per pair. Perfect for hanging grow lights, reflectors, carbon filters, Inline fans, duct fans, etc.
Keep it simple with a mechanical timer to control your LED lights. Easily set your day and night schedule by pushing down the durable plastic pegs. The time can be set at 15 minute intervals over a 24 hour period.
Comes with two grounded outlets and a on or timer switch.
Digital Temperature + Humidity Sensor
You will want to grow your plants in the ideal environment. Keeping track of the temperature and humidity inside the tent you can avoid issues before they become serious problems.
This little guy can be placed inside the tent several ways. It has a stand and a bracket it can be hung on. It also pair of magnets on the back. If you place a piece of metal outside you can stick the sensor to the inside wall.
5 Gallon Fabric Planters (5 pack)
Cannabis growers love fabric pots because the porous material allows the drainage and aeration needed for healthy growth.
Proper ventilation allows roots to be naturally air-pruned, which helps them develop into a hardy, fibrous root system that is more efficient at absorbing water and nutrients. The porus fabric also helps disperse excess heat.
Each pot comes with a pair of sturdy handle so you can move your plant easily and safely.
Digital pH Pen
Accurately measure the pH of the water you feed your cannabis plants. Maintaining the right pH is very important for cannabis plants to be able to uptake nutrients efficiently. Many times the symptoms of a nutrient deficiency are caused by an improper soil pH.
These digital pens come with their own case, water soluble calibration powder, and a calibration screwdriver.
Digital TDS Pen
This tool helps measure the strength of nutrients your feeding your plants. It’s not a necessity when growing in soil but it can help prevent overfeeding.
The pen will help measure the Total Dissolved Solids (TDS) in a liquid. By calculating the Electrical Conductivity (EC) of your nutrient solution it can determine the concentration of minerals. It will also estimate the concentration in Parts Per Million (PPM).
When growing plants like cannabis they need less nutrients when small and more as they grow. You will start plants out with a 200 ppm solution and by flower you will be feeding them around 1600 ppm
Our nutrient feeding schedule gradually increases the nutrient concentration as you go. Using a TDS meter means you can dial it just a little more.
How much weed can you grow with this 1 plant grow kit?
The 70cm x 70cm tent has enough room to grow 1 cannabis plant. With a 300 watt LED grow light a beginner grower can expect a modest 80g – 100g on their first harvest. Depending on your skill level and growing technique, you could achieve much higher yields. Adding a carbon filter fan kit will also help increase potential yields.
The way we estimate total yield is based on the “Watt to Weight” ratio. Experienced growers aim for 1g of harvested flower for every watt of light energy. So in theory a 300 watt light would produce 300g of cannabis if all goes perfectly. Novice growers should expect lower yields at first until they dial in the best grow methods for a particular strain.
There’s potential to have 4 harvests in a year using this one tent. By starting a seedling outside the tent during the last month of flower, it should be ready for the vegetative phase at harvest time. With good timing, a novice grower could produce 150g of cannabis every three months. That’s 600g of cannabis flower in a year!
Save $25 on a fan & filter combo when you buy this tent.
Upgrade your grow tent with a carbon filter to eliminate odor during flower. A 4″ inline fan will also help air circulate better and replenish CO2 much faster. Better ventilation will help increase your overall yield and quality of life for your plant. This addon is a must if you plan to grow quality cannabis consistently.